•If a switch doesn’t
seem to be receiving updated information from a VTP server:
–Either
the swtich is in transparent
mode. Verify by “show vtp status”
–“there
might not be a switch configured as vtp server”
–The
link between the switch and the other switches is not in trunking mode. VTP can be
advertised only over trunk links. To verify if an interface is trunk or acess
•“show
interface type mod/num switchport”
–Make
sure the vtp version is
compatible with other switches in the VTP domain.
–Make
sure the VTP password matches in the vtp domain
–Make
sure the VTP domain name match that of the VTP server
No comments:
Post a Comment